Class overview | |
---|---|
Operators | ![]() |
Preceded by | 1706 Establishment |
Succeeded by | 1745 Establishment |
Built | 1720–1750 |
The 1719 Establishment was a set of mandatory requirements governing the construction of all Royal Navy warships capable of carrying more than 20 naval long guns. It was designed to bring economies of scale through uniform vessel design, and ensure a degree of certainty about vessel capability once at sea, and was applied to all vessels from the first-rate to the fifth-rate. Once in effect, it superseded the 1706 Establishment, which had specified major dimensions for ships of the second-rate, third-rate and fourth-rate only.[1]
The new Establishment in 1719 was not simply limited to specifying the overall dimensions of each type of warship, but now set out in great detail other factors used in constructing the ship, down to the thickness of timbers ("scantlings") used in construction and planking.
The Establishment adopted in 1719 was subject to substantial revisions in both 1733 and 1741, although on neither occasion was the 1719 Establishment replaced. A new Establishment was finally adopted in 1745.
Before the 1745 centralised all design work in the office of the Surveyor of the Navy, the design of every vessel was the responsibility of the Master Shipwright in the dockyard in which that vessel was built; thus ships built to one Establishment has to conform to the dimensions and other measurements specified by that Establishment, but were to varying designs and therefore did not constitute a "class" in the modern use of the term. The exception to this was when ships were built under contract by commercial shipbuilders, for which a common design was prepared by the Surveyor and copies sent to the shipbuilder for execution; this only applied to some of the two-decker ships and smaller vessels (all three-deckers were built or rebuilt in the Royal Dockyards), and was almost exclusively a wartime occurrence.