Chieftain (FV4201) | |
---|---|
![]() A Chieftain Mark 11 at the Bovington Tank Museum (2013) | |
Type | Main battle tank |
Place of origin | United Kingdom |
Service history | |
In service | 1960s–1990s |
Used by | United Kingdom, Iran, Iraq, Jordan, Kuwait, Oman |
Wars | Iran–Iraq War Persian Gulf War |
Production history | |
Manufacturer | Leyland Motors |
Unit cost | £90,000–£100,000 (1967)[1] |
No. built | 1896 (900 for the UK, 996 exported) |
Specifications | |
Mass | 55 long tons (62 short tons; 56 t) |
Length | 35 ft 4 in (10.77 m) – gun forward[2] 7.5 m (24 ft 7 in) – hull |
Width | 12 ft 0 in (3.66 m)[2] |
Height | 2.9 m (9 ft 6 in) |
Crew | 4 |
Armour | Glacis: 127 mm (5.0 in) (72°)[3] Hull sides: 50 mm (2.0 in) (10°) Turret: 350 mm (14 in) (60°)[3] |
Main armament | L11A5 120 mm rifled gun |
Secondary armament | 2 × L7 Machine Gun |
Engine | Leyland L60 (multifuel 2-stroke opposed-piston compression-ignition) 750 hp (560 kW) 6 Cyl, 19 litres. |
Power/weight | 11.1 hp (8.3 kW)/ton (at sprocket)[2] |
Transmission | TN 12[2] |
Suspension | Horstmann: Horizontal Coil Spring Suspension Bogies |
Ground clearance | 1 ft 10 in (0.56 m))[2] |
Fuel capacity | 195 imp gal (890 L; 234 US gal)[2] |
Operational range | 500 km (310 miles) on roads |
Maximum speed | Road: 40 km/h (25 mph) (Mk. 1- Mk. 3) 43 km/h (27 mph) (Mk. 5)[4] |
The FV4201 Chieftain was the main battle tank (MBT) of the United Kingdom from the 1960s into 1990s. When introduced, it was among the most heavily armed MBTs of the era, mounting a 120 mm Royal Ordnance L11 gun, the equal of the much larger specialist heavy tanks then in service. It also was among the most heavily armoured, with up to 195 mm (7.7 in) that was highly sloped to offer 388 mm (15.3 in) thickness along the line of sight.
A development of the Centurion, the Chieftain introduced the supine (reclining) driver position to British design allowing a heavily sloped hull with reduced height. A new powerpack and improved transmission gave it higher speed than the Centurion despite being heavier due to major upgrades to armour protection and the armament; this allowed it to replace both the Centurion MBT and Conqueror heavy tank while performing their roles effectively.
The multi-fuel engine proved to be the design's primary drawback;[5] it was said that the Chieftain was extremely effective if it broke down in a useful location. This led to a series of improved models with new armor, sensors, engines and suspension systems, and these saw sales export success. Among these was the Shir 2 version for Iran, which added Chobham armour, one of the first British uses of this armour. This order was cancelled due to the Iranian Revolution in 1979.
It was intended that the Chieftain would be replaced by a new design, the MBT-80. When tensions with the Warsaw Pact rose in 1980, Vickers offered a further updated version of the Shir 2 which became Challenger 1. This could be available years earlier and still met many of the MBT-80 design goals. Challenger deliveries began in 1983, but initially proved problematic and the Chieftain remained in front-line service until 1996 with the introduction of the Challenger 2.
ogork128-129
was invoked but never defined (see the help page).