Serial Peripheral Interface

This article may need to be rewritten to comply with Wikipedia's quality standards, as it reads like a guide or textbook. You can help. The talk page may contain suggestions. (March 2021)

This article appears to be slanted towards recent events. Please try to keep recent events in historical perspective and add more content related to non-recent events. (December 2023)

Serial Peripheral Interface (SPI) is a de facto standard (with many variants) for synchronous serial communication, used primarily in embedded systems for short-distance wired communication between integrated circuits.

SPI follows a master–slave architecture, ^[1] called main–sub herein, ^{[note 2] [note 3]} where one^{[note 4]} main device orchestrates communication with one or more sub (peripheral) devices by driving the clock and chip select signals.

Motorola's original specification (from the early 1980s) uses four logic signals, aka lines or wires, to support full duplex communication. It is sometimes called a four-wire serial bus to contrast with three-wire variants which are half duplex, and with the two-wire I²C and 1-Wire serial buses.

Typical applications include interfacing microcontrollers with peripheral chips for Secure Digital cards, liquid crystal displays, analog-to-digital and digital-to-analog converters, flash and EEPROM memory, and various communication chips.

Although SPI is a synchronous serial interface,^[2] it is different from Synchronous Serial Interface (SSI). SSI employs differential signaling and provides only a single simplex communication channel.

Cite error: There are <ref group=note> tags on this page, but the references will not show without a {{reflist|group=note}} template (see the help page).