![]() | This template should not be used in articles as links to search result pages are among the links normally to be avoided. |
This template creates a link that can be used to store a Wikipedia search box query. A search link is useful for collaborative search on Talk pages and most other pages, but it is not to be used in articles. If used in articles, it outputs the above warning.
{{Search link|first|second|third}}
The name of the template is Search link, or sl for short.
The second and third parameters are optional and have defaults, so the short form is {{sl|query}}
.
Both a search link and a search box go to the same search engine. The same query produces the same result.
The basic search covers articles. It finds words and phrases composed of letters and numbers very quickly, but a basic search can also query for all articles that contain a string that includes punctuation, math, and other symbols as seen in the page content or as seen in the page wikitext.
1 | {{Search link |
There is one search term, a phrase that produces 18 results, including a redirect. For one term, the page ranking rule is simple: title matches, on top. Two pages hit on "Search Engine Query" and one on "[[Search engine (computing)|search engine]] query". |
2 | {{Search link |
Added a term: insource:/"slash delimited regex"/. Now there are 15. Three were filtered out because regex match only exact strings. All other searches always ignore capitalization, punctuation, math, and other symbols, like the ]] above. Proves a basic difference with search 1: only insource: searches wikitext. All other terms search what is rendered. |
3 | {{Search link |
There are three search terms. They produce 1169 results. Many page ranking rules apply to make the top most likely and the bottom least likely, probably. |
4 | {{Search link |
Similar to search 3, the regex crawled character-by-character through the same 1169-page filter to produce its same 15 results. As much as that seems, 1169 is nothing compared to running an unfiltered (unaccompanied) regex exposed to the 61,267,926 pages on the wiki to produce some 15 results.[1] |
5 | {{Search link "Arithmetic" titles & "2 + 2" |
The regexp is the first term, but the prefix: term first filters out all but a few titles that start with the characters A-r-i-t-h-m-e-t-i-c, then the regexp crawls character-wise. Perhaps such a label conveys this to your team. |
This template differs from the search box superficially when searching for an equals sign. In the search box you just say =, but here you must use the five-letter string {{=}}.[2]
In search 5 notice the need for the double quotes around the search pattern: insource:/"slash delimited regexp"/
. These protect any characters from being interpreted as regex metacharacters, and ensures they are interpreted literally. In basic searches quotes are always used, to enable exact-string searches in the wikitext. In advanced searches the double quotes are not used, so that the metacharacters can act as conditional and branching operators to create generalized patterns.
Search 2 exemplifies the easiest filter to apply to accompany any regexp search. It just takes the same phrase and make it a separate term. Given any regexp insource/"exact string search"/, just accompany it by an insource:"exact string search". The later term will always act like a perfect filter, matching every alphanumeric, and ignoring every non-alphanumeric, speeding through an indexed search to filter out pages the regexp couldn't possibly match. As for other filters, a namespace is weak, but every additional term increases regex power.
The next section covers Search link arguments more in depth.
Here are the template parameters for Search link.
1 | or |query= |
The search query. It becomes the text of the search link (how the link will look) so it accepts |text= .
|
2 | or |label= |
A label to replace the default text. A new look to the link, so it also accepts |link= . Defaults to show the search query.
|
3 ⋮ 20 |
|3|4|5|…|20 |
The search domain: one or more namespaces abbreviated "nsx", where x is
any namespace number. |
|limit= |
Number of search results on the first page. Named parameter only, not positional. |
Namespaces | |||
---|---|---|---|
Subject namespaces | Talk namespaces | ||
0 | (Main/Article) | Talk | 1 |
2 | User | User talk | 3 |
4 | Wikipedia | Wikipedia talk | 5 |
6 | File | File talk | 7 |
8 | MediaWiki | MediaWiki talk | 9 |
10 | Template | Template talk | 11 |
12 | Help | Help talk | 13 |
14 | Category | Category talk | 15 |
100 | Portal | Portal talk | 101 |
118 | Draft | Draft talk | 119 |
710 | TimedText | TimedText talk | 711 |
828 | Module | Module talk | 829 |
Former namespaces | |||
108 | Book | Book talk | 109 |
442 | Course | Course talk | 443 |
444 | Institution | Institution talk | 445 |
446 | Education Program | Education Program talk | 447 |
2300 | Gadget | Gadget talk | 2301 |
2302 | Gadget definition | Gadget definition talk | 2303 |
2600 | Topic | 2601 | |
Virtual namespaces | |||
-1 | Special | ||
-2 | Media | ||
Current list (API call) |
You only ever need to use parameters 3–20 if you want a profile of two or more namespaces for a search domain. Otherwise you can just say the namespace name (or all) at the beginning of the query, or a prefix parameter at the end of the query.
When the query goes through this template, the default search domain is article space, just as it is for basic users. The default search domain of a user, logged-in or not, is article space unless the user set their preference.[3] But no matter who uses a search link the results will always be the same. "Cut and paste" can never guarantee the same results for a search, but a search link can because the search domain is just article space for everyone, or search domain is the set of namespaces you set for everyone.
If you know the numbers of your search domain profile, you just type them in ns=ns0&ns1&ns118
. (You can get them from the namespace table to the right.) Otherwise you refine your query and search domain on the search results page, whose Advanced interface is designed to select and adjust namespaces with no knowledge of the namespace numbers. Once that produces satisfactory results, you copy the namespaces string from the URL (in your browser's address bar), and paste it into |ns=
, and you can get the query from the search results page search box, and paste it as the query, and that's your search link.
If you have just one namespace in your search link, and it's not article space, you can specify it by saying, say, ns=ns10, or |ns10" at parameter position 3 or greater:
{{sl|"search link" namespace||ns10}}
→ "search link" namespaceFor one namespace the explicit name is preferred:
{{sl|Template:"search link" namespace}}
→ Template:"search link" namespaceThe explicit name is preferred if you will be publishing or saving your search link. That way when it is run later the search domain shows up explicitly at the beginning of the search box of the search results page to inform the user. Otherwise only the URL and only the namespace-profile dialog frame pops up on the search results page to inform the user. When it is two or more namespaces, these things always happen, because the query only accepts one namespace (as the first term only). But all is also an informative query, a pseudo-namespace for Search only. If you see a query begin with all:, the URL will be loaded with all the namespace parameters.
You can use "all" in {{Search link}} to specify all namespaces:
{{sl|query|ns=all}}
{{sl|query|label|all}}
but again, it is far more preferable to say
{{sl|all:"search link" namespace}}
→ all:"search link" namespacethan it is to use:
{{sl|"search link" namespace||all}}
→ "search link" namespacefor the reasons given just above. But when specifying "all", the query time is about seven times greater because there are that many more pages on the wiki than there are articles. If a more targeted search is possible, it runs much more quickly than the "all" search.
For example, if you have a query for which know the search domain is 10 and 11, and you want no label, then you need a parameter 3, but you need no parameter 2, so per the template parameter rules the search link can be made in four general ways:
{{sl|query||ns10|ns11}}
When parameter 1 unnamed, and parameter 2 is unnamed | | (defined as the "empty string"), then parameter 3 can be defined unnamed ns10, and parameter 4 can be defined unnamed ns11
, and so on. Nothing is named because everything is defined.{{sl|query|3=ns10|4=ns11}}
Parameter 2 is undefined, but that's fine because parameters 3 and above are all named...{{sl|query|ns=ns10&ns11}}
or the empty positional parameter | | is not needed when |ns=
defines itself named.{{sl|query=query|label=|ns=ns10&ns11}}
Everything is explicitly named.For another example, if you select the "Wikipedia" and "Help" namespaces, then run a query, the URL will show ns4=1&ns12=1
. Copy that and paste it to |ns=ns4=1&ns12=1
. (Note: you can ignore the "=1" part from the URL.)
Note how the URL contains ns0, ns1, ns2, and ns3, and how it got them:
{{sl|systems operations|3=ns2|4=ns1|ns=ns3|20=ns0}}
→ systems operations{{sl|query = systems operations|||ns2|ns1|ns3|ns0}}
→ systems operations{{sl|systems operations|3=ns2&ns1&ns3&ns0}}
→ systems operationsIf you need to develop a highly specific search domain, a very elaborate one carved out of a set of the thirty namespaces, then you will have developed this at the search results page using the Advanced search domain picker there. Then you just cut and paste the entire string from the URL of your found search domain namespaces, and paste it into one named parameter |ns=
.
To type in namespaces 0, 2, 4, 5, 7 and 9, with no label, the two easiest ways are:
{{sl|query||ns0|ns2|ns4|ns5|ns7|ns9}}
{{sl|query|ns=ns0&ns2&ns4&ns5&ns7&ns9}}
The order is irrelevant.
All these involve insource:/slash delimited regex/
with filters. Any search link with an insource:/regex/
search should always provide the additional query terms that would filter (reduce) the search domain as much as possible. This template defaults to article space if no namespace is given, which is a filter.
The need to match an equals in an article is not surprising, and is basic. You have to use {{=}} or |query=
or |1=
just to get the equals sign in your query to the search engine, or {{!}} to get the pipe character to the search engine. Both pipe characters and the equals signs are template sensitive for all templates, so you can always quote them with curly brackets like that inside templates. Although the search box can take = and | directly, quoting is necessary in the search link because otherwise they have their parameters meaning.
Regex are sensitive to punctuation, brackets, math and other symbolic characters, collectively known as "punctuation" so you quote them, because otherwise they have their regex metacharacter meaning. The "metacharacters" of CirrusSearch have claimed most punctuation characters as functions in their regex, but you don't have to know all the metacharacter functions just to search for them as targets literally. You can simply quote all punctuation to search for them as literal targets in wikitext. The way to easily quote every character in an entire regexp is to put the whole term in quotes: insource:/"regexp with literal characters"/
To get a pipe character through both the template and the search engine to target it as a character in wikitext, you have to quote it twice, hence the frequent need for the six characters \{{!}} in an advanced search link. The equals sign is not a metacharacter, so it does not have to be quoted twice, as the pipe character does. The pipe character is a metacharacter that means OR.
To generate advanced regex searches, see about doing so at {{regex}}.
The search engine can
A search matches what you see rendered on the screen and in a print preview. The raw "source" wikitext is searchable by employing the insource parameter. For these two kinds of searches a word is any string of consecutive letters and numbers matching a whole word or phrase. All other keyboard characters like punctuation marks, brackets and slashes, math and other symbols, are not normally searchable.
By default Search will also stem the words and match them too. It automatically sorts results by the frequency and location of these, but also can boost page ranking by time, template usage, or even similarity to other pages.
Search is a search engine that does a full text search by querying an index database. It offers search syntax and parameters exceeding the capabilities and control of other public search engines that could search Wikipedia.
Say the search box is given two words. The search starts with two index lookups, and the two results are combined with a logical AND. But before they are displayed as search results, they must all be assigned a final score before the top twenty (listed on the first page) can be displayed, and they must be formatted with snippets and highlighting. Page ranking deals quickly with very large numbers of pages, by approaching things statistically, and taking several swipes through the data.
These attributes for a word earn that page a higher score:
There can be several other scoring mechanisms. The parameters that you can control are morelike, boost-template, and prefer-recent.
There are now eleven parameters for various approaches to searching the many namespaces. Four of the seven new parameters now offer to target these page characteristics: hastemplate and linksto, insource and insource:/regexp/. The other three now offer to target page ranking: morelike works all alone, a prefer-recent term can be added to any query, and there is now also a boost-template parameter. The other four, preserved in name only, from the entirely rewritten previous version of Search, are intitle, incategory, prefix, and namespace.
Any search will feature one of these approaches
The concept of a search domain plays an important part in all this. By default it is just article space, but in general a search domain starts out as a set of namespaces, and ends up as all the pages in the search result.
One term of a query will set the search domain for another term in the same query. The order is optimized by the search engine. The query term1 term2 transforms the search domain twice to get those search results. For example, a bare namespace returns the pages of the namespace. The query term1 term2 regexp relies heavily on the first two terms to reduce the search domain size.
All terms in a query are indexed searches unless they are a regexp. Indexed terms run word-wise instantly, and a regexp runs character-wise slowly. Even the most basic use of a regexp, just to find an exact string, should always limit the size of its search domain to as little as possible. This can be as simple as adding a few terms, (as covered below), because each term in a query tends to reduce the number of pages. Never run a bare regexp on the wiki especially if your user profile is preset to Everything. The search engine limits the number of regexp searches that can run at once. Without the proper filter running alongside a regexp it will run for up to twenty seconds, and then incur an HTML timeout.
On the search results page, the initial search domain on which the query was run is indicated by the following, given in increasing power to override the others:
For example, if the namespace parameter is all, the size of the initial search domain will be the 61,267,926 pages in all namespaces: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 100, 101, 118, 119, 710, 711, 828, 829 A prefix parameter specifies just one of those namespaces, in whole or part. If the initial search domain is the default, Content pages its size is the 6,869,449 pages in namespace 0, (article space).
A search can be set into a link to specialize and share searches: [[Special:Search/search]]. Such a query should always be a fully specified by specifying an initial search domain so as to avoid user profile discrepancies. This way it gives the same results. For example, if more than one namespace is needed, use {{search link}}.[6]
Other helpful approaches to the search engine features are
Greyspace characters are the non-alphanumeric characters: ~!@#$%^&*()_+{}|[]\:";'<>?,./. Any string of greyspace characters and/or whitespace characters is "greyspace".
Greyspace is ignored except where it has meaning as a modifier in syntax.
Parameters also accept words and phrases, but each can search their own index and interpret their own arguments, such as for
The delimiters:
Colon : character:
A search is a query with one or more terms. The query does not actually search the page database, but rather, a search queries a prebuilt, constantly maintained, search index database. When creating the search index of words on the wiki, or when entering a query, a word boundary is greyspace. Greyspace characters can create a multi-word_phrase. We must say tab and newline even though we cannot put those characters in our query; this is because of the important fact that the same analysis that is done on the wikitext is also done on the query. A word boundary is whitespace characters (tab, space, or newline) or greyspace characters. Greyspace characters and whitespace characters are all folded together as one, just as special characters like æ (ae) or á (a) are folded into the standard keyboard characters.
A phrase expresses an ordering of words,[7] and there are three ways to make one, depending on how aggressively you want the phrase to match.
"Quotation marks", phrases are called an "exact phrase" because it is exact wording: stemming, fuzzy search, and wildcards are not used in an "exact phrase". Like the rest of Search, an "exact phrase" tolerates greyspace between words. Joining_with_non-alphanumeric(characters) only, will employ stemming on the words. CamelCaseNaming or letter222number transitions, matches the phrase in greyspace, with stemming, and additionally matches the word itself. Parameters can require the quotation marks to include whitespace in their input.
The wikitext is searched by employing the insource parameter. The insource parameter ignores greyspace characters too.
For example, to find the phrase
http://en.wikipedia.orgview_html.php?sq=Bangladesh&lang=en&q=Search_engine
, use
http://en.wikipedia.orgview_html.php?sq=Bangladesh&lang=en&q=Search_engine, or use
insource: "http en wikipedia org wiki search engine".
When you search for a word, that word is just looked up in an index. An indexed search instantly concludes with all search result titles, without having to search the wiki itself.
Each word you see in a page's content (a title's content) is already in an index, where it points to all its other prearranged results. A word is indexed to a list of page names, where it is seen in the text, or it is seen in the title only.
Each indexed word is seen as
For transitions from lower to upper case, (or camelCase), and transitions from letter to number:
for or digit-letter these match singly or together. In other words you don't need the space, but that also works to find either "word" of a camel case or mixed alphanumeric word. You don't need a space, and non-alphanumeric characters are treated as that null space.
We may call these "word" characters or "alphanumeric" characters at times as opposed to the "non-word" characters, which are ignored except as to function as a word boundary. Usually a word boundary is just a space character.
These words are case-insensitive: a-z is equivalent to A-Z, so Search box will navigate to a pagename regardless of capitalization (even though wikilinks and URLs must match capitalization apart from the initial character).
Each word is aliased to all its word-stems, so cloud, clouding, clouds, clouded, cloudy will all point to the same index entry.
In Search the characters !@#$%^&*()_+-={}|[]\:;'<>,.?/ are ignored. Any mix of whitespace characters and these non-word characters, we may refer to as grey-space. Grey-space, then, is all non-word characters except the double quote character, which is not ignored.
Grey-space is a string of one or more characters such as brackets and math symbols and punctuation and space. Now, a search-indexed word will be found between grey-space, and grey-space is an implied AND of two words in a search query, but the AND is not always implied: when two phrase exist side-by-side the AND is required.
Exceptions to what "words" are indexed are these portioned words:
The word boundary between such numeric portions and an alphabetic portions may include grey-space or not, but a phrase search turns off portioning, because it is an "exact phrase search", the words in the phrase matching only alphanumeric words delimited by grey-space.
Words joined only by non-alphanumerics are treated like a phrase. So word1_word2&word3 is the same as "word1 word2 word 3". However they will also match camelCase and letter-number transitions. An exact phrase search will not match camelCase or letter-number transitions. For example, terms like wgCanonicalNamespace and !wgCanonicalSpecialPageName can be found looking for canonical page name
.
For example:
The following match the single term txt2regEx
on a page:
txt
, 2
, regex
, reg
, ex
, txt2
, 2reg
, 2regex.
None of those portions would match in a phrase search; only "txt2regex" would match.[8]
The following match the two terms 2 + 2
:
2 or "2"
, 2 2 or "2 2"
, "2 2" or "2"
, "2+2" or 2+2
, "2-2" or 2-2
, "2.2" or 2.2
Each term is a query, and the grey-space is an AND.
Stemming is a way to match meaning "ambitiously", to get the numbers up, for possible semantic matching, such that run_shoe also matches running shoes
. Stemming is a spelling algorithm only distantly reliant on any dictionary.[9] The algorithm attempts to find the same word, but in all its word endings.
A fuzzy search will match a different word. Words (but not phrases) accept approximate string matching or "fuzzy search". A tilde ~ character is appended for this "sounds like" search. The other word must differ by no more than two letters.
But it can differ by one letter in these ways. A fuzzy search matches the word exactly plus words like it.
With wildcards you can specify which letters change, including the first two letters, and you can increase the number of letters that can change. Wildcards have their own rules:
While the word indexes are being built and updated, stemming automatically adds aliases to most entries. An actual dictionary is not used. Instead it runs an algorithm that applies generic English syntax rules for word endings. The results are imperfect.[10] Even misspelled words, non-words, and words with numbers in them are indexed and stemmed in this way. By adding different forms of the same word to the indexed search query, stemming is a standard method search engines use to aggressively garner more search results to then run a bunch of page-ranking rules against.
For example, stemming will alias cloud, clouds, clouded, and clouding. It will not alias the word cloudy, but it will alias the various forms of cloud to the non-word cloudion, because -ion is a common word ending.
Stemming is automatically turned off for insource searches:
To turn stemming off put the word in quotation marks, this is an "exact phrase" search.[11]
For example: gameFolks, game!folks, game:folks matches FolksSoul
An "Exact phrase" or a word will match in a title. And creating a phrase "with tilde"~ just turns on stemming, (which is equivalent to forming a phrase by joining the words with_greyspace). But "exact phrase"~1 matches the wording in that order plus allows any one extra word to fall between the two words.
For example
"hitch4 hiker2" finds the two "words" in that order, (possibly separated by punctuation or brackets or other keyboard symbols like math symbols), and without the quotes finds them in the same article. In both cases the article is listed when the space satisfies the logical AND meaning.
hello_dolly does the same thing as "hello dolly" does, but the double quotes version offers a proximity filter. After the closing quote you add a tilde ~ and a number that indicates the total number of words allowed between all the terms.
Backward proximity works too, but includes the two end words between each segment. Proximity cannot make the last word proximate to the first. The proximity can be a large number, like 500 or 1000.
Say a page has word1 word2 word3 in that order.[12]
Two search terms with no quotes is two filters, and a bunch of page-ranking rules.
Truth logic is AND, OR, and not.
Logical OR increases results, whereas logical AND decreases them. Logical not is a good way to refine a query by removing any kind of term except the prefix parameter.
For example while -refining -unwanted search results. For example credit card -"credit card" finds all articles with "card" and "credit"
Prefix and namespace are the only positional parameters, and namespace is an unnamed search parameter. One or the other of them is used in a query to override the initial search domain set by user profile or by the search bar. They aren't used together: prefix overrides namespace.
The namespace argument must be at the beginning of a query, and the prefix: parameter must be at the end of a query.
Namespace: is an unnamed search parameter that goes at the beginning of a query.[13] The namespace is followed by a colon, followed by zero or more whitespace characters. and matches a namespace name. The namespace names and "all" work as expected, but seeing one in the search box does not guarantee it represent the search results, as explained below.
In addition to the usual namespace names and their aliases
Pages with namespaces outnumber pages without them 7 to 1.
On the search bar at the search results page
These differ from namespace "all" by matching your search terms inside a pdf on a help:file page, that item on the search results page says "(matches file content)".
For example file:"885.7 seconds" matches inside a pdf, but all:"885.7 seconds" does not.
prefix:namespace: string filters a namespace down to one or more pages where string matches the pagename's beginning characters.[16] For example, prefix:help:t finds Help pagenames that begin with "T".
Prefix can perform the function of the namespace filter, plus it can isolate a single article whereas intitle cannot. Prefix cannot isolate a single page if it has subpages.
An alternative to a prefix query is Special:PrefixIndex:
Comparing the namespace and prefix parameters:
The following methods set an initial search domain by namespace:
These are in the order of precedence. A prefix overrides a namespace overrides the GUI. The argument to the prefix parameter is a fullpagename, which conveys a namespace.
When alternating search domains, with the various techniques,
and because of their priorities,
it deserves repeating: check the search bar indication; it is most subtle.
[17]
The Advanced namespace selection pane from the search bar is not so subtle.
It will remain for as long as the earlier selection
"remember selection for future searches" is in effect.
You can "remember" article space and then either
1) press Content,
2) choose another search bar search domain, or
3) remove all instances of &profile=advanced
from the URL.
These five search parameters filter a namespace according to an input word or phrase.
These parameter names must be in all-lowercase letters.
Intitle finds a word or phrase in a pagename. Like a word or phrase search stemming and fuzzy searches can apply.
To find a match in a redirect title, or to apply a proximity search to a title you can rely on page ranking software to boost title matches before content matches. So a basic word or phrase search, or proximity search, is an alternative to intitle.
For example
Incategory has the general format
and selects from the pages section of given category pages, those pages that are also in the search domain.
Because many pages outside the mainspace are also categorized, the counts often won't match the category unless the search domain is the entire wiki:
Multi-category input counts a page only once. The following two categories have 209 pages in article space, with six pages found in both categories:
On the other hand these are disparate categories:
Because of the nature of Wikipedia:categorization these categories share no pages:
Categories and Search are synergistic.
In the following examples, note how the page description in the category namespace show category sizes instead of page sizes.
Hastemplate finds pages that transclude a given template. Finds template usage, not just a name pattern, because it will find all pages where the template content itself was used in any way. The results differ slightly depending on the alias you give.
Hastemplate
If you don't find the searched template name on the wikitext of the page, it can mean either that you gave the canonical pagename but it found an alias, or that it was called as a secondary template by way of a template that is shown in the wikitext. To find visible (primary) calls only, use insource.
Insource: term finds a word or phrase in wikitext.
Unlike a normal search insource doesn't find things "sourced" by a transclusion.
Insource targets wikitext in two ways. They look similar, but the regexp form employs the slash / character to delimit the regexp.[19]
A basic regexp is an easy way to find a specific, /"exact strings"/, as shown below. The double quotes are field delimiters. They are escape characters which quote all the set of characters between them, and keep their interpretation literal (keep any metacharacter interpretation from occurring).
An advanced regexp uses the metacharacters to program general string patterns. It finds everything, even pieces and parts of words, conveying no notion of "words", but only that of a string of characters in a sequence. Metacharacters are interpreted unless quoted by a backslash, double quotes, or square brackets. See the section on regex. The obvious example is, you must quote any slash in your pattern so it won't be interpreted as the closing slash delimiter, using \/ instead of / to match a literal slash. A regexp interprets all metacharacters. Testing a regexp pattern responsibly, requires limiting the search domain
Abusing regexp will not harm Wikipedia performance, but it limits regex search information from flowing elsewhere.
Only regex interpret greyspace characters. The regular insource, as everywhere else, ignores greyspace characters. So
insource:"M S"
matches m/s, as do insource:
"M-S" and insource:
"m=s". But insource:/M\/S/
will match it, and the filtered version will too: insource:"M/S" insource:/M\/S/
.
The insource:"word1 word2" filter is the most obvious filter for insource:/word1 word2/, where the two wikitext words are only separated by punctuation and space. Say the target string is {{Val|9999|ul=m/s|fmt=commas}}:
insource:
"val 9999 ul m s fmt commas" → matchhastemplate:
val insource:
"9999 ul" → matchhastemplate:
val insource:
"999" → no matchhastemplate:
val insource:
"fmt commas" → matchhastemplate:
val insource:
"ul m" → matchhastemplate:
val insource:
"ul M S" → matchhastemplate:
val insource:
fmt → matchInsource matches words sequentially, but the match could occur anywhere on the page, not necessarily inside the {{template markup}}. For this there is {{template usage}}, and it matches any regex inside the template.
For thorough precision, use /regex/. For example, to find any bare URL inside <ref name=name>...</ref>
,
with [external link brackets label]
, with possible ref name=name
you than can't use the simpler insource:"ref http server com".
Taking a cautious approach, before trying the full regexp, create a search domain under 10,000 pages.
Starting with two filters, prefix and insource:
insource: "ref http" prefix:A
98000 is too many to start. insource: "ref http" prefix:AA
1000 is good.insource:/\<ref[^>]\> *\[?https?:\/\/[^][<> "]+\]? */
zero for prefix:AA, one for prefix:ABinsource:/\<ref[^>]\>
instead, and then try prefix:AA zero; try AB, one.[^>]*
.insource: "ref http" insource:/\<ref[^>]*\> prefix:AB
. There are 3700, and that is OK.We have the only possible filter insource: ref prefix:AA
.
That filter produces a regex search domain of only 2300.
The filter insource: ref prefix:A produces a search domain of 264000.
Running the regex on that many pages is possible, and produces 64000 results.
To find a more targeted URL, say yahoo.brand.edgar.com, use insource: "http yahoo brand edgar com" (or cut and paste the entire URL, slashes dots, and all; it doesn't matter). Do another search with the https version. These searches capable of more flexibility than Special:LinkSearch. No filter is needed, but every search always benefits from extra information: any word, any phrase, and most parameters.
Linksto Reports wikilinks to a page name.
Linksto reports wikilinks to a page name, even if the wikilink is
Linksto can differ from the "What links here" tool, because the search domain for "What links here" is all. Linksto search results are in your default search domain. (Also linksto reports the count, as do all searches.)
In addition to wikitext it searches inside a pages transcluded content.
first, and then scan the contents.[20] For example
will report a list of 300 articles that link to it, as will "What links here". But Mozart and scatology is actually linked only 15 times by content authors. The rest are due to Mozart and scatology in Template:Wolfgang Amadeus Mozart on the unwanted pages. The template is wanted, but the "links to" reference is probably not.[21]
The trick to getting around this, and just finding all authorship links to an article is a regexp search:
That search will find articles only because the initial : limits the initial search domain to article space, no matter how your default search domain happens to be set. It will find all of the links many times more quickly than a bare regexp would, because the first insource term instantly creates the refined search domain that sets the proper limits for the regexp search. A regexp can accommodate for the variations found in the wikitext allowed by the permissions of wikilinks: 1) the metacharacter * allows for "zero or more" space characters before and after the title, and 2) the [character class] at the beginning allows for the relaxed capitalization of the first character in any pagename, and 3) the character class at the end finds the link whether it is labeled via the pipe character | or closed via the square bracket ] of the wikilink.
Links to transclusions are handled by hastemplate.
A page's overall score determines its place in the search results.
A better match will raise the score.
Wikiproject "importance" and article quality assessments can factor in. Searching from a page, its categories, wikidata, and geo-location can factor in.
Knowing this you may be able to better find, for example, a half-remembered title. Using intitle may skew the results too much because of the order of the words. Use those in a word search, and depend on page ranking. The titular words will show up on top.
To get an idea of how CirrusSearch might work see mw:Search/Old#Search_Weighting_Ideas.
To sort search results by date, use prefer-recent. To sort search results by template usage, use boost-template.
The morelike search parameter lists all articles that compare in word frequency and word length to one or more given articles.
Morelike calculates a multi-word search.
See them highlighted in the snippet.
Morelike looks up the given pagename(s) in the search index, creates a word-frequency aggregate and a word-length aggregate from all the words, and calculates a multi-word search based on those, plus internal, variable settings. It is an expensive search.
For example, say you search for
then pick a name from that list and add it
then add more names, until you have five input pagenames. Then you could begin blindly adjusting this automatically calculated morelike query, saying the following sorts of things: Make the calculated query
Then, say, you adjust the number of input pagenames that have a word to two (out of five). https://en.wikipedia.org/w/index.php?title=Special:Search&profile=default&search=morelike:ant%7Cbee%7Cwasp%7CEusociality%7Ctermite&fulltext=Search&cirrusMtlUseFields=yes&cirrusMltFields=opening_text&limit=1150
It can also find similar articles based on just the title, or on just the headings, or on just the lead section.
The search results depend on internal (Mlt
, More like this) variables,
settable via the URL,
concerning which words to search with:
&cirrusMltMinDocFreq | How many articles with a search word, minimally |
&cirrusMltMaxDocFreq | How many articles with a chosen word, maximumally |
&cirrusMltMaxQueryTerms | number of search words, maximum |
&cirrusMltMinTermFreq | Minimum word frequency of a chosen word. |
&cirrusMltMinWordLength | Minimal length of a term to be considered. Defaults to 0. |
&cirrusMltMaxWordLength | The maximum word length above which words will be ignored. Defaults to unbounded (0). |
&cirrusMltFields | A comma separated list of the fields to use. Allowed fields are title, text, auxiliary_text, opening_text, headings and all. |
&cirrusMltUseFields (true or false) | use only the field data. Defaults to false: the system will extract the content of the text field to build the query. |
&cirrusMltPercentTermsToMatch | The percentage of terms to match on. Defaults to 0.3 (30 percent). |
For example here is what the address bar (turned search bar) looks like for a morelike search for lead sections of two articles, as compared to other lead sections: https://en.wikipedia.org/w/index.php?title=Special:Search&profile=default&search=morelike:William+H.+Stewart%7CLeroy+Edgar+Burney&fulltext=Search&cirrusMtlUseFields=yes&cirrusMltFields=opening_text Notice the end containing the two added URL parameters that activated a morelike capability.
You can sort search results by date.
It goes anywhere in the query. It defaults to 160 days as "recent", and applies its boost formula 60% of the score. The formula is not the usual multiplier, it is an exponential multiplier, potentially much more powerful. This enables it to work where the default for "recent", instead of being 160 days, is can be as little as 9 seconds. If your "recent" means 9 seconds, use prefer-recent:0.0001
For example, if you're only interested in the relatively few articles that have changed in the last week, use 7 instead. How this works is that all articles older than seven days are only boosted half as much, and all articles older than 14 days are boosted half as much again, and so on.
The boost is more than the usual multiplier, it is exponential. The factor used in the exponent is the time since the last edit. The bigger the time since the last edit, the less the boost. The formula is e−t, where t is either the interval in days or interval of interest.
Add prefer-recent to the beginning of a search. It will give the more recently edited articles a boost in the search results. The general form is
This parameter accepts two, comma-separated arguments to allowing for adjusting the default settings. By default this will scale 60% of the score exponentially with the time since the last edit, with a half life of 160 days. So the default is prefer-recent:0.6,160.
This can be changed to increase the weight:
or decrease it:
The proportion_of_score_to_scale must be a number between 0 and 1 inclusive. The half_life_in_days must be greater than 0 but allows decimal points, and so works pretty well to sort close edit times if very small.
For example prefer-recent:0.6,0.0001 operates with a half-life of 8.64 seconds
This will eventually be on by default for Wikinews.
Boost-templates:" " adds weight to pages with the given template or templates (plural). Using this search parameter overrides the normal template-boosting function of Search. Don't use this search parameter without supplying the weight-boosting argument unless you mean to disable the template weighting function for the search.
The general format is
You see, normally the system message[22] titled MediaWiki:cirrussearch-boost-templates boosts the score of the following fullpagenames: Template:Featured article|200% Template:Featured picture|200% Template:Featured sound|200% Template:Featured list|175% Template:Good article|150% Template:Sockpuppet category|5% Template:Maintenance category|5% Template:Hidden category|5% Template:Tracking category|5% Template:Category class|5% Template:Category importance|5% Template:CatTrack|5% Template:Template category|5%. These are the actual template names and there actual boost. These are replaced during the boost-templates usage.
For example a search for "phenom" AND "lecture", with the templates Search link and regexp having the weighting score of the pages they are on multiplied by 1.5 and 2.25 respectively, ignoring all other templates (halting the addition of any score for any other template):
Boost-templtes differs from hastemplate in
If you just want your search results to include only pages with certain templates, use hastemplate one or more times instead, to filter out pages that don't. Otherwise, choose a multiplier similar to the system message shown above. Multiplying a page score by 10 is done with 1000%, and will probably mask all other weighting functions, such as "when the search words match in the title", will have little effect in the presentation of search results, and is not recommended because it affects the order of the entire list.
Either hastemplate or boost-templates one can go anywhere in the query, each having other terms on either side of it. is a term in a query that can go anywhere in the query, having other terms on either side of it.
Relevant issues in CirrusSearch:
cm2
, m3 does not find m3
, where the superscript are unicode characters.Workarounds
Troubleshooting
All pages on Wikipedia are scanned and indexed by Wikipedia's own search engine. The entire wiki is treated as one "full text" kept in a separate database (an "index") built just for searching. It's like the index in a book, but practically every word and every number is indexed to every page.[23]
Since each word in the prebuilt search index already points to the pages that contain it, a keyword search usually corresponds to a single record lookup in the index. (This is also true for phrases, to a certain extent.) "Index searches" take basically no time to execute. They are cheap and plentiful.
There are separate indexes kept updated for:
Any text transcluded from a template is indexed as if it were really present on its target page. (In other words, by default, a keyword search is done on the text of the rendered Wikipedia page, not on the page source itself. However, you can change this by using insource:keyword
to search the source markup instead of the rendered page.)
Preparing and maintaining the search indexes is done by Wikipedia's servers, in the background, in near real time. As soon as you save the page, a few seconds later you can search for the changes you just made. For templates that are transcluded onto many many pages, the propagation of those changes to all the pages in the index might take a while.
The index is based on alphanumeric characters; it stores no information on non-alphanumeric characters. If you type any punctuation or brackets into the search box when doing an indexed search, those characters will be silently discarded.
A basic indexed search
Instead of doing a basic indexed search on keywords, you can perform a regex search, which bypasses the index. A regex search scans the text of each page on Wikipedia in real time, character by character, to find pages that match a specific sequence or pattern of characters. Unlike keyword searching, regex searching is by default case-sensitive, does not ignore punctuation, and operates directly on the page source (MediaWiki markup) rather than on the rendered contents of the page.
To perform a regex search, use the ordinary search box with the syntax insource:/regex/
or intitle:/regex/
. The expression regex
denotes a regular expression in MediaWiki-flavored regular expression syntax.
Because regex searching scans each page character by character, it is generally much slower than an index search. You can — and should — add additional search terms when using insource:/regex/
to reduce the amount of text being processed. For example:
polish insource:/polish/
finds pages that match a case-insensitive stemmed keyword search for "polish" (including "polished" or "polishing"); then does a case-sensitive regex search within those pages. Only pages that match both filters are returned.insource:polish insource:/polish/
is similar, but starts with a case-insensitive search of the source markup instead of the rendered page (so it will find usages like Poles
, and not find transclusions).intitle:
, incategory:
, and linksto:
are excellent filters.[clarification needed]hastemplate:
is a good filter.[clarification needed]Adding an index-based search term to reduce the amount of text being scanned is important simply to make your own regex search finish in a reasonable amount of time. Regex searches that take too long will "time out" and return only partial results. Overuse of slow regex searches might cause temporary throttling of the feature for yourself and/or everyone on Wikipedia. (However, you cannot affect the site performance of Wikipedia as a whole simply by abusing regex search.) Remember that a single regex search can take multiple seconds, and there are currently 47,830,216 registered users on Wikipedia. Use regex search responsibly.
MediaWiki's regular expression syntax works like this:
insource:/C-3p0/
will search for pages containing the literal string "C-3p0" (case-sensitive).. + * ? | { [ ] ( ) " \ # @ < ~
. Any metacharacter can be escaped by preceding it with a backslash \
. Preceding any other character with a backslash is harmless. For example, insource:/yes\.\no/
will search for pages containing the literal string "yes.no" (case-sensitive). Regex experts should note that \n
does not mean "newline," \d
does not mean "digit," and so on: In MediaWiki syntax, the only use of \
is to escape metacharacters./
is special because it indicates the end of the regex. For example, insource:/yes/no/
is treated the same as insource:/yes/ no
(because the keyword search for no/
ignores punctuation). The /
character must be backslash-escaped everywhere it appears inside a regex – even inside square brackets or quotation marks..
matches any single character. For example, insource:/yes.no/
is matched by yes/no
, yes no
, yesuno
, etc.( )
group a sequence of characters into an atomic unit.|
goes between two sequences and matches either of them. For example, insource:/a(g|ch)e/
matches either age
or ache
.+
matches the preceding character or group one or more times. For example, insource:/ab+(cd)+/
is matched by abcd
, abbbcd
, abbcdcd
, etc. insource:/a(g|ch)+e/
matches agge
, achgchchggche
, etc.*
matches the preceding character or group any number of times (including zero). For example, insource:/ab*(cd)*/
is matched by a
, abbb
, acdcd
, etc.?
matches the preceding character or group exactly zero or one times.{ }
match the preceding character or group a fixed number of times. For example, insource:/[a-z]{2}/
matches exactly 2 lowercase letters in a row. insource:/[a-z]{2,4}/
matches any string of 2, 3, or 4 lowercase letters. insource:/[a-z]{2,}/
matches any string of 2 or more lowercase letters.[ ]
introduce a character class, which matches a single instance of any of the characters in the class. For example, insource:/[Pp]olish/
matches both Polish
and polish
. Characters inside square brackets generally don't have to be escaped, although escaping them remains harmless, and /
still needs to be escaped everywhere. For example, insource:/[.\/\]\n]/
matches a single instance of .
, /
, ]
, or n
.^
(if it appears first of all) represents negation, and the character -
(unless it appears first or last) represents a range. For example, insource:/[A-Za-z0-9_]/
matches any alphanumeric character or underscore, and insource:/[^A-Za-z]/
matches any non-alphabetic character.< >
stand for numbers treated as numbers, not characters. For example, insource:/AD <476-1453>/
is matched by AD 476
, AD 477
, ... AD 1452
, AD 1453
, but not AD 1474
. (But it will also match the first six characters of AD 4760
.)~
"looks ahead" and negates the next character or group. For example, insource:/crab~(cake)c/
should match the first five characters of crabclaw
but not the first five characters of crabcake
.[clarification needed]There are a few additional quirks of the syntax:
@
is a synonym for .*
(match any sequence of characters at all).insource:/0/
fails, although insource:/1/
and insource:/\0/
both succeed." "
are an escape mechanism, like square brackets or the backslash. For example, insource:/".*"/
means the same thing as insource:/\.\*/
.#
is also a metacharacter and must be escaped.[clarification needed]\n
does not mean "newline," \d
does not mean "digit," and so on.^
does not mean "beginning of text" and $
does not mean "end of text." Searching from the beginning or end of a Wikipedia page is not generally useful.Although character classes \n
, \s
, \S
are not supported, you may use these workarounds:
PCRE | MediaWiki | Description |
---|---|---|
\n |
[^ -] |
A newline (also a tabulation character can be found[1]) |
[^\n] |
[ -] |
Any character except a newline and tabulation |
\s |
[^!-] |
A whitespace character: space, newline, or tabulation |
\S |
[!-] |
Any character except whitespace |
^ To exclude the tabulation character as well, copy it and add it to the character set.
In these ranges, " " (space) is the character immediately following the control characters, "!" is the character immediately following space, and "" is U+10FFFF, the last character in Unicode. Thus, the range from " " to "" includes all characters except for control characters (of which articles may contain newlines and tabulation), while the range from "!" to "" includes all characters except for control characters and space.
|1=
to pass in an equals sign to any parameter, even the link label.
# < > [ ] | { }
.
Regular expressions are little computer programs, so it is characteristic of regex searches that they must be written while studying the target data, and tested to achieve their potential precision and thoroughness. However, only a few of these intensive searches are technically able to run at a time against the database.[1] A sandbox minimizes your footprint, and guarantees that you will never run an untested regexp on every namespace in the wiki, even if your default search would let you do that.
Although a normal search targeting the entire wiki will run quickly, a regexp search should target as few pages as possible by using filters in order to run quickly. A filter is part or whole of a database query. Filters include:
Order is not important because the search is optimized by the software before it is run.
To target just one page while experimenting with or developing a regex search, target a fullpagename. From the search box use the filter prefix:fullpagename. From the edit box (of any section of the page with the target data), you can always just write prefix:{{FULLPAGENAME}} and it will "expand" for you to the fullpagename. Although you can edit a history page, technically a "history page" is not a page (in the database), and so {{FULLPAGENAME}} there will point to the database version (not its own rendering). For the same reason, you cannot search for the wikitext on a page that is not already saved (to the database), although you can certainly change the search parameters again and again with no need to save them.
Fullpagename is namespace:pagename. Knowing this you can adjust your Prefix parameter. Although prefix can filter down to one page, it can filter up to a namespace, and it also accepts the beginning letter(s) of set of pagenames if you want to reduce the namespace search domain.
Regex sandboxing uses an ad hoc sandbox made by editing any page containing the target data, and using it as a "sandbox" (not editing it to save it). It then develops by using adding a search link that includes insource:/regexp/, with the filter prefix:{{FULLPAGENAME}} alongside.
Use of a sandbox enables the smallest possible footprint by using filters to limit the search domain. Once your regexp pattern is honed, you increase the search domain. A regex search is best run with filters, not alone even if it is a polished rexexp.
Rather than use the search box, where entering an equals sign and a pipe character, and "quotes around phrases" is a straightforward matter, it is still easiest to use a regex-based search-link template — {{regex}} or {{tlusage}} — on the page with sample data, because then you can focus on the target data there and on writing the regexp pattern. It is easier, that is, if you already understand how templates "escape" the pipe character and the equals sign. See Help:Template#Parameters for other important details.
The procedure here is an iterative, read-evaluate-modify cycle. Regex development requires that you study the target data while writing and rewriting its pattern.
Caveat emptor: if you change the target for an immediate retesting, you'll have to save and purge, but not if you just change the regexp.
As an ad hoc sandbox, you can show the wikitext of a section like this, (already saved in the database), modify some of the patterns in the regex-search-link template calls on this page, do a Show Preview, and see what matches when you click on the newly formed regex search-link, all quite safely, and without changing a thing in the database.
The template calls that produce "1 ft/s, 2 sq ft, 3 m/s, 4 m*s-2, 5 ft.s-2, 6 °C/J, and 7 J/C" appear in the wikitext of this section like this:
Note how the above targets are |numbered|, then click on the links below.
Query | Search link | Answer |
---|---|---|
Q1 Using {{search link}}, does this page employ template Val ? | {{sl|hastemplate: Val}} → hastemplate: Val
|
A. No, because this pagename is in Help not Article space.(Search link default). 1300 search results. |
Q2 Using {{search link}} responsibly, does this page use Val's fmt parameter? | {{sl|insource:/\{[Vv]al\{{!}}[^}]*fmt/ prefix:{{FULLPAGENAME}}}} →
|
A2.1. Look for 1 and 3 in the search results in bold text. (Adds an appropriate filter.) |
Using {{regex}} instead... | {{slre|\{[Vv]al\{{!}}[^}]*fmt}} →
|
A2.2 Less typing than {{search link}}. |
Using {{template usage}} instead... | {{tlre|Val|pattern=fmt}} →
|
A2.3 Easiest for templates. |
Q3. Who uses u=ft OR ul=ft? (one-letter differs) | {{regex|ul?=ft}} →
|
A. Look for 1, 2, and 5 in bold text. |
Using {{template usage}}... | {{tlre|val|pattern = ul?=ft}} →
|
Finds same pattern, but only inside a Val template. |
Q4. AND of these, who also uses fmt=commas after that? | {{slre|ul?=ft.*commas}} →
|
A. No context shown, but article title is shown. A half a Bug? |
Who has one space before the word "commas"? | {{slre|. commas}} → insource:/. commas/ prefix:Template:Search link
|
A. 1 but not 2. |
Q5. Who uses either u or ul with "ft" OR uses "fmt=commas". | {{slre|(ul? *= *ft{{!}}fmt *= *commas)}}
|
A. 1, 2, 3, and 5. (The pattern matches all possible spacing.) |
Q6. Who uses ft or m, in |u= or |ul= ?
|
{{slre|ul? *{{=}} *(ft{{!}}m)}}
|
A. 1, 2, 3, 4, and 5.
Used {{!}} for the alternation metacharacter. Used {{=}}. (Could have used named |
Q7. Who uses . or * in the unit code? | {{tlre|val|pattern = u *= *(\.{{!}}\*)/}}
|
A. 4 and 5. |
Who uses a pipe? | {{regex|\|}} → insource:/\/ prefix:Template:Search link
|
All of them |
Q8. Who uses / or - within the |u= or |ul= paramter?
|
{{tlre|val|ul? *= *[^{{!}}}]+(\/{{!}}-)}}
|
A. 1,3,4,5,6 and 7. |
Q9. Where is Val used in the template namespace for numbers only, (no u, ul, up, or upl parameters). | {{tlre|val|pattern = ~(u[lp].)|prefix = 10}}
→ hastemplate:"val" insource:/\{\{ *[Vv]al *\|[^}]*~(u[lp].)/ prefix:Template: |
A. In the 30 or so templates listed. |
Q10. Which articles use {{Convert}}'s and(-) option? | {{tlre|convert|pattern=and\(-\)| prefix=0}}
→ hastemplate:"convert" insource:/\{\{ *[Cc]onvert *\|[^}]*and\(-\)/ prefix:: |
A Coast Range Arc and Skipjack shad |
In Q2, notice how the MediaWiki software ignores the spaces around parameters, but how in Q4 the same MediaWiki software processes the spaces inside parameters. Q2 might have been solved with a plain insource:val fmt search because "fmt" and "val" are whole words, and fmt is rarely seen apart from inside Val. How about hastemplate:val insource:fmt?
A search link stores a query in a link that takes you to live search results for that stored search. They're found on user pages and talk pages. Use one to bring the full feature set of MediaWiki Search, or features of external search engines, to bear on users unfamiliar with their search parameters.
One type of search link is a wikilink with all the capabilities of Search (search box), and with standard wikilink syntax: [[Special:Search/query| label]]. So this search link will (1) navigate: [[Special:search/Wales]] → Special:search/Wales or (2) search: [[Special:search/~Wales | search/~Wales]] → search/~Wales if you prefix a ~ tilde character.
All other search links are made from a template that will build a URL instead of wikilink. A URL can for example can call off-site search engines to search Wikipedia.
Search boxes are made by <inputbox>
tags. See mw:Extension:InputBox.
For searches with exact matches, exact in upper and lower cases, or in punctuation marks, see Help:Searching § grep.
(term)
in parentheses; useful for Wikipedia:disambiguation study<inputbox>...</inputbox>