Uda Walawe Dam | |
---|---|
![]() The dam with all four spillways open. | |
Country | Sri Lanka |
Location | Udawalawe |
Coordinates | 06°26′02″N 80°51′15″E / 6.43389°N 80.85417°E |
Purpose | Irrigation, Power |
Status | Operational |
Dam and spillways | |
Type of dam | Embankment dam |
Impounds | Walawe River |
Length | 3.9 km (2.4 mi) |
Spillways | 4 |
Spillway type | Tainter gate |
Reservoir | |
Creates | Udawalawe Reservoir |
Total capacity | 267MCM |
Maximum length | 8.6 km (5.3 mi) |
Maximum width | 7 km (4.3 mi) |
Udawalawe Power Station | |
Coordinates | 06°25′55″N 80°51′02″E / 6.43194°N 80.85056°E |
Operator(s) | CEB |
Commission date | April 1969 |
Type | Conventional |
Turbines | 3 × 2 MW |
Installed capacity | 6 MW |
The Udawalawe Dam is a large irrigation dam in Udawalawe, in the Southern Province of Sri Lanka. The dam consists of an embankment section and a gravity section, combining the total dam length to approximately 3.9 km (2.4 mi). The dam is also used for hydroelectric power generation, powering two 2 MW units, commissioned in April 1969 .[1]
The water level of the reservoir is controlled by the five tainter gate spillways located at the eastern end of the dam, with two additional spillways located towards the centre of the dam. The reservoir measures approximately 8.6 km (5.3 mi) in length, with a maximum perpendicular width of 7 km (4.3 mi).[citation needed]