Varistor

Metal-oxide varistor manufactured by Siemens & Halske AG.
Modern varistor schematic symbol, which is the same as a thermistor symbol[1]

A varistor (a.k.a. voltage-dependent resistor (VDR)) is a surge protecting electronic component with an electrical resistance that varies with the applied voltage.[2] It has a nonlinear, non-ohmic current–voltage characteristic that is similar to that of a diode. Unlike a diode however, it has the same characteristic for both directions of traversing current. Traditionally, varistors were indeed constructed by connecting two rectifiers, such as the copper-oxide or germanium-oxide rectifier in antiparallel configuration. At low voltage the varistor has a high electrical resistance which decreases as the voltage is raised. Modern varistors are primarily based on sintered ceramic metal-oxide materials which exhibit directional behavior only on a microscopic scale. This type is commonly known as the metal-oxide varistor (MOV).

Varistors are used as control or compensation elements in circuits either to provide optimal operating conditions or to protect against excessive transient voltages. When used as protection devices, they shunt the current created by the excessive voltage away from sensitive components when triggered.

The name varistor is a portmanteau of varying resistor. The term is only used for non-ohmic varying resistors. Variable resistors, such as the potentiometer and the rheostat, have ohmic characteristics.

  1. ^ "Standards for Resistor Symbols". EePower. EETech Media. Retrieved September 13, 2021.
  2. ^ Bell Laboratories (1983). S. Millman (ed.). A History of Engineering and Science in the Bell System, Physical Science (1925–1980) (PDF). AT&T Bell Laboratories. p. 413. ISBN 0-932764-03-7.

From Wikipedia, the free encyclopedia · View on Wikipedia

Developed by Tubidy